Groups are used to make two or more light switches function as one. This also means that two or more Orro Switches in one Group will function like a multiway switch (where more than one switch controls the same lights). Groups can also be used to allow Orro Switches used in multiway settings to function as one.
The light levels of the grouped lights will always be the same and can be controlled from any of the group Switches. All Switches in the group will act as one and have the same general lighting settings (Natural Lighting, Preference Learning, Nighttime). Since you may interact with Switches differently, each individual Switch will have its own Auto-On and Auto-Off sensitivity and Light Sensing sensitivity settings.
Groups, like single Orro Switches, must exist in a Room. A Room can have multiple Groups and any Scenes will be reflected across the single Switches and Groups in that Room.
Example of a Group
If you have 2 or more Switches that control different lights in the same room or area that you want to function as one. You’ll need to replace each switch that controls that lighting circuit. Once you have the Orro Switches installed and setup, they will appear as a Group in the Orro App. You will now be able to control the lights from either Orro Switch.
Example of a Group in the Orro App
If you have questions or need more information from the Orro team, please don’t hesitate to reach out via email at firstname.lastname@example.org.
Support Team members are available during the following hours:
Weekdays (Mon - Fri): 7am – 7pm Pacific Time
Weekends (Sat & Sun) & Holidays: 10am – 6pm Pacific Time