Connect Orro to August Doorbell

If you’d like to connect the Orro Switch to August Doorbell, please follow the instructions below to connect your Switch to enable the Chime feature. Chime is an extension of your smart doorbell and can play the doorbell sound on your Orro Switch to any room of the home. 

NOTE: Before connecting, please make sure that your Orro Switch is fully setup. 

How To Connect Orro to August Doorbell:

1. Open the Orro App
2. Tap the account icon in the top right
3. Select “Integrations” > “Doorbell”
4. Tap “Connect”
5. Select “August”
6. Sign into your August Account
7. Enter your code and tap “Verify”
8. Tap “Agree”
9. Once a device is found, you will be notified of “Doorbell Found”. Tap “Next”
10. Walk through the remaining steps and app training in the App. Once setup is complete, you will see a “Success!” screen. Tap “Done” to complete setup
11. Test the integration by ringing your doorbell and see if you hear the Switch(es) chime

You’re all set to have Chime on your Orro Switch!
Now, if someone is ringing our doorbell, it will play the doorbell sound on your Switch. 

If you do not want Chime to ring on a particular Orro Switch, please complete the following instructions:

1. Stand in front on your Orro Switch
2. Swipe right-to-left on the display to access the doorbell Face. By default, this Face is immediately to the right of the dimmer, however this can vary based on your Faces settings.
3. Tap the button to mute Chime for that Switch only
   
   

Step-by-Step Illustrations To Connect Orro to August Doorbell:

1. Open the Orro App
2. Tap the account icon in the top right
   
3. Select “Integrations” > “Doorbell"
     
4. Tap “Connect”
   
5. Select “August”
   
6. Sign into your August Account
   
7. Enter your code and tap “Verify”
   
8. Tap “Agree”
   
9. Once a device is found, you will be notified of “Doorbell Found”. Tap “Next”
   
10. Walk through the remaining steps and app training in the App. Once setup is complete, you will see a “Success!” screen. Tap “Done” to complete setup
    
11. Test the integration by ringing your doorbell and see if you hear the Switch(es) chime
    
    

Step-by-Step Illustrations To Disable Chime on a Switch:

If you do not want Chime to ring on a particular Orro Switch, please complete the following instructions:

1. Stand in front on your Orro Switch
2. Swipe right-to-left on the display to access the doorbell face. By default, this face is immediately to the right of the dimmer, however this can vary based on your Faces settings.
   
3. Tap the button to mute Chime for that Switch only. It should look like this:
   

---

If you have questions or need more information from the Orro team, please don’t hesitate to reach out via email at [e-mail].

Support Team members are available during the following hours:
Weekdays (Mon - Fri): 7am – 7pm Pacific Time
Weekends (Sat & Sun) & Holidays: 10am – 6pm Pacific Time