The purpose of this step is to enable Ready to Connect mode on your Orro Switch.
To begin, click the top of the Switch 3 times in quick succession. You should see “Ready To Connect” appear on the Switch screen.
NOTE: This step may take up to 1 minute.
If more than 1 minute has passed and you do not see “Ready To Connect”:
Restart the Switch by pressing and holding the bottom of the Switch for 10 seconds until the system menu appears and select “Restart”.
- If restarting the Switch does not solve your issue, you may need to factory reset your Switch. To do this, press and hold the bottom of the Switch for 10 seconds until the system menu appears, select “Factory Reset”, and then confirm “YES”.
Still experiencing an issue?
Email us at email@example.com or call our Support line at (747) 253-0608. Support Team members are available during the following hours:
Weekdays (Mon - Fri): 7am – 7pm Pacific Time
Weekends (Sat & Sun) & Holidays: 10am – 6pm Pacific Time